California: A Pollution Disaster in Marin County

Pulse Modulated Radiofrequency Microwave Radiation (RF/MWR)

January 26, 2022 | GQ-EMF-390 METER reading | | 

Let’s unpack this from

Average of 5,ooo µW/m² could be a peak reading of 50,000 to 500,000 µW/m².

How does that translate?  According to

PFD = Power Flux Density, reported as µW/m²


PFD = (V/m)2/377 watts per square meter  (W/m2)


(65)2/377 = 11.2 million µW/m², exceeding the FCC guideline for frequencies 1500 MHz and above by about 12%.

Using (f/1500)*10 million,

  • If you are metering primarily 600 MHz, then the FCC limit is 4,000,000 µW/m² and your reading is exceeding that by 180%
  • If you are metering primarily 900 MHz, then the FCC limit is 6,000,000 µW/m² and your reading is exceeding that by 87%
  • If you are metering primarily 1,200 MHz, then the FCC limit  is 8,000,000 µW/m² and your reading is exceeding that by 40%


Next steps

  1. Get a better broadband meter, with current certificate of calibration
  2. Bring a spectrum analyzer to determine which frequencies are contributing to this total
  3. Meter at three different times of day: 10:00 am, 2:00 pm and 6:00 pm — log peak and average readings for 30 minutes each time.
  4. Report this Wireless Telecommunications Facilities (WTF) to the FCC with the supporting data

 For the magnetic reading,

Read this from 2016:


3.8 milliGauss is in Severe Hazard territory

More Information:


This is the meter mentioned in the New Hamsphire report

Information on the GQ-EMF-390 here

More information here




Thank you to CS and PG for RF/MWR reading and analysis



Re-Inventing Wires: The Future of Landlines and Networks



No more WiFi: How to wire your house for Internet




Link To Learn How To Begin Reducing Your RF/MWR Exposure Today




Authors: Beverly Rubik  1   2 Robert R Brown  3 PubMed

Scientific Study: Evidence for a connection between coronavirus disease-19 and exposure to radiofrequency radiation from wireless communications including 5G

“Coronavirus disease (COVID-19) public health policy has focused on the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) virus and its effects on human health while environmental factors have been largely ignored. In considering the epidemiological triad (agent-host-environment) applicable to all disease, we investigated a possible environmental factor in the COVID-19 pandemic: ambient radiofrequency radiation from wireless communication systems including microwaves and millimeter waves.”